Patio Furniture Legs Keep Catching in the Joints

Find whether a foot catches or the chair rocks

Move the empty chair across the seating area and note where it snags. A foot dropping into a joint differs from rocking on units that are uneven or loose. Check for missing glides and damaged leg ends. If a paver moves under ordinary use, have the pavement repaired rather than relying on larger chair feet to bridge it. Do not test an unstable chair with someone sitting in it.

Try a compatible foot solution

Ask the furniture maker about replacement glides or wider outdoor feet that fit securely and preserve stability. A loose cap can leave the chair worse than before. Try the solution through pulling out, sitting down and moving back under the table. Avoid filling joints with an improvised rigid material: the joint has a job in the pavement, and a furniture annoyance does not justify changing its system.

If joints are becoming empty as well as catching feet, check Paver Joint Sand Keeps Washing Out before changing furniture.

Check the seating area before buying paving

For new paving, set up a sample large enough to reproduce several joints and use the actual dining chair. Include its normal angle to the table, because a diagonal pull can behave differently from a straight slide. Compare texture, bevels and joint geometry as well as colour. Larger-format units may reduce joint encounters, but their suitability, support and installation still need checking for the site.

Unilock treats unit support, surface alignment and joints as parts of a complete installation; furniture fixes should preserve that paving system. Unilock: installing a patio on grade.

Before you finish

• Test the actual chair, not only a sample foot.
• Separate unstable paving from a small furniture glide.
• Preserve specified joint material and geometry.