
Can You Add Privacy Slats to an Existing Chain-Link Fence?
Privacy slats change how a chain-link fence catches wind. Check the existing fence, product fit and exposure before filling the mesh.
Read the guideGuides 1-12 of 13 · Page 1 of 2

Privacy slats change how a chain-link fence catches wind. Check the existing fence, product fit and exposure before filling the mesh.
Read the guide
A gate can align perfectly when closed and still hit rising ground. Map its whole swing before changing hinges, paving or the bottom edge.
Read the guide
Sight along the run from a safe position and photograph the post against a fixed background.
Read the guide
Watch the gate through its full movement.
Read the guide
Close the gate slowly and note whether the latch hits low, sideways or both.
Read the guide
Measure bins at their widest point, the mower with its normal handles attached and any trailer or garden cart you use.
Read the guide
Begin at each end of the damaged bay.
Read the guide
Compare a dry upper board with the bottom near soil and with shaded areas behind plants.
Read the guide
A lightly pigmented stain, a solid-colour coating and leaving cedar to weather are different maintenance commitments.
Read the guide
A double gate usually has one leaf used daily and another opened for wider access.
Read the guide
A catalogue panel height is only one part of the calculation.
Read the guide
A fence can begin with daylight below it and end up buried after a few enthusiastic spring mulching sessions.
Read the guide