
Black dust around a door hinge: clean, lubricate or replace?
A little black powder is a clue about the hinge. Spraying every moving part is not a diagnosis.
Read the guideGuides 1-12 of 30 · Page 1 of 3

A little black powder is a clue about the hinge. Spraying every moving part is not a diagnosis.
Read the guide
The film packet says double-pane. The window maker says no film. Both statements need to be read before anything goes on the glass.
Read the guide
The visible crack is only one part of the order. The frame, backing and roller system determine what can be reused.
Read the guide
Hold the handle still and watch the plate. The part that moves tells you which connection to check.
Read the guide
A bracket can fit while the headrail still projects into the room. Measure both conditions before ordering.
Read the guide
The roller that escaped may not be the part that failed. Start at the pivot end of the folding pair.
Read the guide
A window that needs a stick underneath it needs a repair. Find the balance system before taking anything apart.
Read the guide
That new towel hook may matter more than the old roller. Map the scratch before touching the adjustment nuts.
Read the guide
Matching the width and height is the easy part. The hinges and latch need to land in exactly the right places too.
Read the guide
The narrow glass panels may share more with the door than the paint colour. Find out how the entry was built.
Read the guide
A tiny triangle of light needs a precise repair. More weatherstrip everywhere can make the latch harder to use.
Read the guide
A spinning screw is a fastening problem. The answer depends on what it is supposed to bite into.
Read the guide